TWO COMPONENT POLYURETHANE JOINT FILLER
5.72$
MADE IN TURKEY
Prices are in American Dollar
Shipping prices not included
Prices are Exwork
- Description
- More Products
Description
“DEFINITION:
It is a cement-based, ceramic, granite ceramic, granite, marble, natural stone, porcelain, large-size coating material adhesive mortar with high adhesion strength and high elasticity, reduced slip and extended working time.
Product Class: C2TE S2
APPLICATION AREAS AND PREPARATIONS:
It can be used safely on the floors and walls of places such as hospitals, schools, stores, markets, which are exposed to heavy traffic indoors and outdoors.
APPLICATION:
DECOTILE-101 GRANITE, TILE AND CERAMIC ADHESIVE – LARGE – FLEX is added into clean cold water slowly and mixed with a low-speed mixer for 5-10 minutes until it becomes lump-free. The required amount of water is 25 kg. for 5.5-6.5 liters. The amount of water should be adjusted within these ratios according to the weather conditions. The mixed mortar is left for 5 minutes and mixed again.
The prepared mixture is spread on the surface with a suitable trowel. According to the size of the material to be laid, suitable carding is done (one-sided or double-sided bonding) and the material is laid on the surface with the help of a rubber mallet.
Joint gaps are filled 24 hours after the application.
If the surface and ambient temperature rises above +25oC, the surface and ceramics should be moistened by spraying at regular intervals to prevent sudden drying of the adhesive.
Do not use by adding water to hardened and solidified material.
Tools used after the application are cleaned with water immediately.
DECOSTONE Construction Chemicals Ltd. Sti. is not responsible.
TECHNICIAL SPECIFICATIONS:
•
Appearance / Color : Gray Powder
Density: 1.50±0.2 kg/lt
Flexural Strength: >5 N/mm²
Compressive Strength: >8 N/mm²
Initial Tensile Adhesion Force: ≥ 1 N/mm²
Tensile Adhesion Force After Immersion in Water: ≥ 1 N/mm²
Tensile Adhesion Force After Heat Aging : ≥ 1 N/mm²
Tensile Adhesion Force After Freeze-Thaw Cycles: ≥ 1 N/mm²
Open Waiting Time: Tensile Adhesion Force: ≥ 1 N/mm² (After min. 20 min.)
It is produced in accordance with TS EN 12004 C2TE S2.
CONSUMPTION:
Depending on the surface and application conditions (one-sided or double-sided bonding), it is 3.5-6.5 kg/m².
PACKAGING:
25 kg Kraft Bag.
64 pieces, 1600 kg in 8-layer stacked pallets.
Pallet size: 110 cm x 110 cm.”
